Characteristics of the film faced plywood
Film faced plywood is a kind of metal material with both high polymer film and sheet metal, which is more excellent than the traditional printing and coating tinplate in deep drawing resistance, wear resistance, corrosion resistance and decorative characteristics. This feature determines that the laminate can be coated with cold rolled sheet as the substrate for rapid and accurate overprinting of the printing film.
1. The film faced plywood has excellent performance
(1) The corrosion resistance and corrosion resistance of the film faced plywood are incomparable to the coating plate. Because it is a plastic film composite plate, so there is corrosion resistance and adhesion of the coating plate, for the coated plate is easy to solve, this is the industrial plant, film faced plywood is the ideal material.
(2) The appearance of the laminate is smooth, smooth, decorative and feel good.
(3) The film faced plywood has good chemical stability, weather resistance and aging resistance, and can adapt to the harsh environment without falling off and rust.
(4) The film faced plywood processing performance is excellent, with deep punching resistance, wear resistance, not easy to damage in the processing.
Environmental protection and energy saving
(1) The production of film faced plywood is solvent free and exhaust gas discharge, also do not need coating drying, less pollution to the environment, energy saving is also very obvious.
(2) Because the film faced plywood does not use chemical coating and ink, but the use of plastic film for thermal cladding, so the coated board does not contain a variety of harmful chemicals to human body. The problems of environmental hormones and volatile organic compounds have been solved.
(3) Does not contain phthalic acid, phthalate esters and other harmful substances, can be fully used as renewable resources. Reduce the production of carbon dioxide in the manufacturing process, and do not produce dioxin in the regeneration of resources. Waste film-covered iron cans are reused as iron resources, with a recovery rate of 100%. When the film and iron are recycled and reused, due to heating, the film burns into water and CO2, and this part is converted into natural gas, which is used as power energy when the iron is heated. Waste film can also be used as regeneration.